Registrato: 01/08/19 06:41
|If you have a website with some traffic , you can make money by having links to merchants' online shops on your site.
If someone goes through your links into the shop of the merchant, and buys something, you earn commission from the sale, between 5% and 40% depending on type of merchant.
Some merchants also pay for each click or each lead. A lead is a new visitor to the shop that asks for more information or prize offers.
People or companies having these links on their web-sites, are called affiliates , and the links are called affiliate links. The administrative infrastructure by the merchant that the affiliate register into, in order to get the linking code, is called an affiliate program.
To register into an affiliate program is usually free, and through the program you get freely all you need to make the linking code, to monitor the traffic through your links , and to see what commission you have earned.
An affiliate program is not a MLM program, since the affiliates only earn from sales, leads or clicks.
However, in many programs you can recruit other affiliates and earn some commission from the sales made by the recruited affiliates too.
There are also common networks operated by third-part companies where several merchants use a common software and administrative infrastructure to recruit affiliates and monitor the traffic from affiliates. These are called affiliate networks. Both the merchants and potetial affilliates register into the network, and the affiliates can find links to the online shops of hundreds of merchants to use at their web-site. Examples of affiliate networks are Commission Junction and Clixgalore.
From my experience , the best affiliate programs are for merchants selling althernative health items or items for erotic improvements. I also have good experience with programs in the fields skincare, cosmetics and hobby.
What will work best for you, will however depend upon the kind of traffic you have, and the interests of people visiting your site.
Knut Holt is a freelands IT consultant that also earn from affiliate links at his websites. For more information about affiliate programs, pleace visit this site:
Hipot is an abbreviation for high potential. Traditionally , hipot tester is a term given to a class of electrical safety testing instruments used to verify electrical insulation in finished appliances, cables or other wired assemblies, printed circuit boards, electric motors, and transformers.
Under normal conditions , any electrical device will produce a minimal amount of leakage current due to the voltages and internal capacitance present within the product. Yet due to design flaws or other factors, the insulation in a product can break down, resulting in excessive leakage current flow. This failure condition can cause shock or death to anyone that comes into contact with the faulty product.
A Hipot test (also called Dielectric Withstanding Voltage (DWV) test) verifies that the insulation of a product or component is sufficient to protect the operator from electrical shock. In a typical Hipot test, high voltage is applied between a product’s current-carrying conductors and its metallic shielding. The resulting current that flows through the insulation, known as leakage current , is monitored by the hipot tester. The theory behind the test is that if a deliberate over-application of test voltage does not cause the insulation to break down, the product will be safe to use under normal operating conditions—hence the name, Dielectric Withstanding Voltage test.
In addition to over-stressing the insulation, the test can also be performed to detect material and workmanship defects, most importantly small gap spacings between current-carrying conductors and earth ground. When a product is operated under normal conditions , environmental factors such as humidity, dirt, vibration, shock and contaminants can close these small gaps and allow current to flow. This condition can create a shock hazard if the defects are not corrected at the factory. No other test can uncover this type of defect as well as the Dielectric Withstand test.
Three types of Hipot tests are commonly used. These three tests one of electrical safety tester differ in the amount of voltage applied and the amount (or nature) of acceptable current flow:
Dielectric breakdown Test. The test voltage is increased until the dielectric fails, or breaks down , allowing too much current to flow. The dielectric is often destroyed by this test so this test is used on a random sample basis. This test allows designers to estimate the breakdown voltage of a product’s design.
Dielectric Withstanding Voltage Test. A standard test voltage is applied (below the established Breakdown Voltage) and the resulting leakage current is monitored. The leakage current must be below a preset limit or the test is considered to have failed. This test is non-destructive and is usually required by safety agencies to be performed as a 100% production line test on all products before they leave the factory.
Insulation Resistance Test. This test is used to provide a quantifiable resistance value for all of a product’s insulation. The test voltage is applied in the same fashion as a standard Hipot test, but is specified to be Direct Current (DC). The voltage and measured current value are used to calculate the resistance of the insulation.
The beauty of Ebay is that you can start to sell things and make money after only a couple of minutes of registering, you then simply list an item that is already in your house that you no longer want or is just collecting dust. Remember the phrase:
One Persons Trash is another Person's Treasure (a perfect phrase for Ebay).
Once you get selling on Ebay it becomes very addictive, especially when yo.